The OL 410 is a microprocessor-controlled, precision DC lamp source specifically designed to accurately operate tungsten filament lamp standards and calibration sources. The power output range is 200 watts for the OL 410-200
The OL 410-200 is for use with OL Series 220 Standards and OL Series 752-10 Plug-in Standards.
Tungsten lamp standards must be operated at their specified calibration current in order to realize the accuracy of the standard. A small error in setting the lamp current can induce a sizeable, wavelength dependent error in the spectral output of the lamp. The OL 410 enables the lamp current to be set to an accuracy of better than ±۰٫۰۲%, a factor of about 121⁄۲ better than most other commercial power supplies, which are typically 0.25%.
In order to eliminate electrical shocking of the lamp due to high initial current surges, a ramp function is used to control the turn-on current rise. Once the instrument is turned on, the current automatically increases at a slow, safe rate until the set current is reached. A fail-safe, shut down circuit protects the lamp standard against any equipment malfunctions.
۳۲ Volts DC
۸٫۰۰ Amps DC
< 2 ppm/ V
< 25 ppm/ °C
۱۰۰/ ۱۱۵/ ۲۰۰/ ۲۳۰ VAC, 50/ 60 Hz
** The power input voltage is factory configured on the OL 410-1000